Series 10 | Series 20 | Series 30 | Series 40

S40 Cabinets

Series 40

The Series 40 line is ideal for offices, laboratories or schools that desire a warmer or more traditional look. BASC, LLC uses wood veneer for the exterior exposed surfaces available in standard wood species. The Series 40 can be finished with a standard or acid resistant finish. The hardware package for this system can vary depending on user requirement.

Doors - Wood Veneer

  • Faces - Wood veneer product bonded to particle board core. All is backed with balancing material to make a 3/4" nominal thickness door.
  • Edges - following options are available: .020 wood veneer or pvc edging 3mm solid wood or pvc edging
  • Hinges - following options are available: 125 degree european concealed hinge 5 knuckle institutional hinge.
  • Pulls - standard 96mm dull chrome, meets A.D.A. requirements.

Doors - Glass Style

  • Un-framed glass sliding doors have anodized aluminum track rolling door assembly. Framed glass is an available option.
  • Pulls - Routed finger pull in glass.

Drawers

  • Fronts - Wood veneer product bonded to particle board core. All is backed with balancing material to make a 3/4" nominal thickness door.
  • Edges - following options are available: .020 wood veneer or pvc edging 3mm solid wood or pvc edging
  • Drawer sides are made from 1/2" decorative panels doweled and glued into 3/4" decorative panel sub front and drawer back. Drawer bottoms are 1/2" decorative panel dadoed and glued into all four sides. A secondary hot melt glue is applied on bottom of drawer on all four sides for added strength. Top edges of drawer box are edge banded with matching .020 PVC.
  • Slides - 100 lb. drawer slide.
  • Slides for lateral file drawer - 150 lb. side mounted full extension ball bearing slide.
  • File drawers get the Pendaflex file suspension rails to support pendaflex style files.
  • Locks - five pin tumbler lock.
  • Pulls - standard 96mm dull chrome, meets A.D.A. requirements.

Cabinet Box

  • End Panels - 3/4" decorative panel, std. interior color white. Finished ends receive wood product.
  • Backs - 1/2" decorative panel. Finished backs receive wood veneer product.
  • Bottoms - 3/4" decorative panel

Countertops

  • Surfaces - Tops are H.P.D.L. in a standard finish laminated to particle board. Color to be selected by specifier.
  • Back splashes and front edges are coved for easy maintenance.
  • Other options available: Epoxy resin, stainless steel or solid surface material.

Shelves and Partitions

  • 3/4" decorative panel for shelves up to 31-1/2", 1" used for over 31-1/2". Edged with matching .020 PVC edge banding at front.

Top at Walls and Tall Units

  • 3/4" decorative panel. Front is edged PVC. edge banding.

Fillers / Scribes

  • Wood veneer bonded to 3/4" particle board

Stretchers

  • 3/4" x 4" particle board rails with front and back of cabinet back.

Toe Boards

  • Manufactured individually per cabinet by extending ends to floor. Particle board front toe kick is sent loose for field attachment.

General Construction

  • All casework parts are accurately machined and fit for square cases. Case joints are doweled and glued with a polyvinyl acetate resin emulsion adhesive (white glue). All cabinet backs are dadoed, glued once with white glue and a second time with a hot melt adhesive at all four sides then screwed to case tops.