Series 10 | Series 20 | Series 30 | Series 40

S10 Cabinets

Series 10

The Series 10 casework is ideal for high abuse projects like public high schools and hospitals. BASC, LLC utilizes H.P.D.L. (plastic laminate) for all exterior exposed surfaces with a heavy 3mm PVC resilient edge. The hardware package used for Series 10 begins with a 5 knuckle heavy duty institutional hinge and a 100 lb. drawer slide or a 150 lb. drawer slide for file drawers.

Doors - H.P.D.L. Plastic Laminate

  • Faces - H.P.D.L. plastic laminate bonded to particle board core using a polyvinyl acetate resin emulsion adhesive. All is backed with a H.P.L. cabinet liner balancing material to make a 3/4" nominal thickness door.
  • Edges - To be banded with a 3mm PVC edge banding
  • Hinges - Institutional 5 knuckle hinge with “hospital tip”. Three (3) hinges on doors over 36" high.
  • Pulls - standard 96mm dull chrome, meets A.D.A. requirements

Doors - Glass Style

  • Un-framed glass sliding doors have anodized aluminum track rolling door assembly. Framed glass is an available option.
  • Pulls - Routed finger pull in glass

Drawers

  • Fronts - H.P.D.L. plastic laminate bonded to particle board core using a polyvinyl acetate resin emulsion adhesive. All are backed with a H.P.L. cabinet liner balancing material to make a 3/4" nominal thickness door. Colors to be selected by the specifier.
  • Edges - To be banded with a 3mm PVC edge banding.
  • Drawer sides are made from 1/2" decorative panels doweled and glued into 3/4" decorative panel sub front and drawer back. Drawer bottoms are 1/2" decorative panel dadoed and glued into all four sides. A secondary hot melt glue is applied on bottom of drawer on all four sides for added strength. Top edges of drawer box all edge banded with matching .020 PVC.
  • Slides - 100 lb. drawer slide.
  • Slides for lateral file drawer - 150 lb. side mounted full extension ball bearing slide.
  • File drawers get the Pendaflex file suspension rails to support pendaflex style files.
  • Locks - five pin or disc tumbler lock.
  • Pulls - standard 96mm dull chrome, meets A.D.A. requirements.

Cabinet Box

  • End panels - 3/4" decorative panel, std. interior color white. Finished ends receive H.P.D.L. plastic laminate.
  • Backs - 1/2" decorative panel. Finished backs receive H.P.D.L. plastic laminate
  • Bottoms - 3/4" decorative panel

Countertops

  • Surfaces - Tops are H.P.D.L. laminated to particle board. Color to be selected by specifier.
  • Back splashes and front edges can be coved for easy maintenance.
  • Solid surfacing, Epoxy, Stainless steel are also available.

Shelves and Partitions

  • 3/4" decorative panel for shelves up to 31-1/2", 1" for over 31-1/2". Edged with matching .020 PVC edge banding at front edge. Shelves are adjustable by moving a clip which fits into 5mm system holes on 32mm (1-1/2') increments.

Top at Walls and Tall Units

  • 3/4" decorative panel. Front is edged PVC edge banding.

Fillers / Scribes

  • H.P.D.L. laminate bonded to 3/4" particle board. H.P.D.L. laminate to match adjacent cabinet(s)

Stretchers

  • 3/4" x 4" particle board rails with front and back of cabinet back.

Toe Boards

  • Manufactured per cabinet by extending ends to floor. Particle board face trim sent loose for field attachment.

General Construction

  • All casework parts are accurately machined and fit for square cases. Case joints utilize blind dado and glued with a polyvinyl acetate resin emulsion adhesive (white glue). All cabinet backs are dadoed, glued once with white glue and a second time with a hot melt adhesive at all four sides then screwed to case tops.